◆High Performance Bluetooth®Multi-Modal Data Capture
UHF RFID and 2D barcode data capture in an single device.
◆Hardware Platform Independence
Operates with wide variety of Bluetooth® wireless technology enabled host devices from smartphones to tablets, laptops and desktop computers.
The reader is compatible with Android, iOS and Windows.
◆Integrated ePop-Loq® Socket
A smarter way of mounting devices to the UHF RFID reader.
◆Bluetooth LE Support
Lower power consumption and longer battery life.
◆Direct USB Connection
For increased security of data transfer via ePop-Loq® mounts.
Only 400g (14.1oz) including battery, trigger handle and 2D Imager.
◆High Performance Barcode Scanning
Integrated 2D imaging engine provides class leading barcode scan performance via its unique patent pending fast pulse illumination which delivers outstanding motion tolerance and class leading 1D and 2D data capture.
Physical and Environmental Characteristics
16.0 cm x 7.7 cm x 17.5cm (LxWxH).
365 g / 12.8 oz (including non-imager antenna, battery & trigger handle).
400 g / 14.1 oz (including imager antenna, battery & trigger handle).
Speaker, vibration motor, LED.
Removable, rechargeable 3.7 volt 2250 mAh Lithium Polymer pack (Optional Power Handle with 6700 mAh Lithium Polymer pack available).
TSL® custom module with embedded Impinj R2000.
TSL® ASCII 2.0 parameterised command set and Impinj binary protocol.
Optional Micro SD card (maximum 32GB capacity supported). Up to 500 million date and time stamped EPCs can be stored on a 32GB Micro SD card (separate purchase from alternative supplier).
Compatible Host devices (Bluetooth®):
Any Bluetooth® Host1 supporting the Serial Port Profile (SPP) or Human Interface Device (HID) profile (Android, iOS, Linux, Mac, Windows).See Bluetooth® Mode Comparison.
Compatible Host devices (USB):
Any USB host with FTDI VCP driver support (Windows, Linux, Mac, Android).
-10°C to 40°C (14°F to 104°F).
5°C to 40°C (41°F to 104°F).
Less than 1 month at -20°C to +45°C (-4°F to 113°F). Less than 6 months at -20°C to +35°C (-4°F to 95°F).
5% to 85% non-condensing.
Multiple drops to concrete: 4 ft./1.2 m ambient, 3ft / 0.9m across the operating temperature range.
500 0.5 metre tumbles at room temperature (1,000 cycles).
Electrostatic Discharge (ESD):
± 15kVdc air discharge; ± 8kVdc contact discharge.
Meets and exceeds applicable MIL-STD 810F for drop, tumble and sealing.
EPC Class 1 Gen 2.
Nominal read range2:
Up to 6 m (19.6 ft).
Nominal write range2:
Up to 3 m (9.8 ft).
150-degree forward facing.
Detachable, Right Hand Circularly Polarized with optional 2D scanner.
EU: 865-868 MHz; US: 902-928 MHz.
Maximum Output Power:
Up to 30 dBm (region dependant) + 3.0 dBiC Antenna.
Optional 2D imager.
752 x 480 pixels.
Field of View:
Horizontal: 40°, Vertical: 25°.
8 in (203 mm).
Aiming LED (V LD):
2x 625nm LEDs.
Min. Print Contrast:
1D: All major codes 2D: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal Dutch Postal (KIX).
Bluetooth® Version 4.2.
Bluetooth® Frequency Range:
2.4 - 2.4835 GHz.
SPP Profile, HID Profile, Apple iAP2, Bluetooth® Low Energy.
Up to 100m.
Simple Secure Pairing, NFC OOB Pairing.
USB connection to handheld terminal via ePop- Loq® cases (separate purchase).
Peripherals and Accessories
Custom connector - requires 2128 Docking Station for battery charging, and USB connectivity.
USB operating modes:
Tethered for real time data capture in conjunction with SmartWedge software. Download of stored scan data.
TSL® 2128 Docking Station (separate purchase).
Alternative trigger handle gives approximately 3X the original battery capacity.
New ePop-Loq® cases can be ordered by special request (volume dependent, lead times apply).