HID Global’s pivCLASS RK40 wall switch with keypad contactless reader is suitable for use in security areas meeting the FIPS-201 criteria for “Controlled” access and is intended to support the use of a personal identification number (PIN) entered via a keypad and sent directly to a panel or door controller (PIN matched at panel, not on card). The pivCLASS RK40 supports reading any PIV-based card with a contactless interface and containing a Card Authentication Key (CAK) certificate when used in combination with HID Global’s pivCLASS Authentication Module (PAM) or pivCLASS Embedded Authentication.
Key Features
●Capable of PIN matching at the panel
●Supports reading non FIPS-201 credentials such as iCLASS, iCLASS SE, Seos and standard Prox
PKI-Based FIPS-201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC Secure Identity Object (SIO) on iCLASS Seos, iCLASS SE, MIFARE DESFire EV1 and MIFARE Classic standard iCLASS Access Control Application ISO14443A (MIFARE) CSN
125 kHz Credential Compatibility
HID Proximity, EM4102 Proximity, AWID
Device Characteristics
Mounting
Mullion, single or double-gang switch box
Connector Type
Pigtail Cable – 18 inch (0.5 m) Terminal Block – flush mount
Pigtail Cable – 18 inch (0.5 m) Terminal Block - protruding mount
Color
Black Bezel / Silver Trim (Black Trim available as an accessory)
Black Bezel Only
Material Housing
Polycarbonate – UL94 V0 rated
Operating Voltage Range
12 VDC
5 - 16 VDC
Current Draw (max)
250 mA
200 mA
Device Input & Output
Input: Tri-color LED, Buzzer, Hold Output: Tamper Relay
Input: Tri-color LED, Buzzer, Hold Output: Open Collector – TTL
Operating Temperature Range
-35° C to +66° C (-31° F to +150° F) 0% to 95% non-condensing
Storage Temperature Range
-40° C to +85° C (-40° F to +185° F)
-55° C to +85° C (-67° F to +185° F)
Environmental Rating
UL294 Outdoor and Indoor rated
Ingress Protection
IP65
IP55; IP65 if installed with optional gasket (IP65GSKT)
Controller Communication
Half duplex supports OSDP protocol and HID pivCLASS protocol. Wiegand, Clock & Data integrated into base hardware.
Full duplex supports HID pivCLASS protocol, Half duplex supports OSDP and HID pivCLASS protocol . Wiegand, Clock & Data integrated into base hardware.
Cable Distance 1
RS485 for communication (500 ft [152m], 22AWG), (300 ft [91m], 24AWG); two wires for power (500 ft [152m], 22AWG)
Device Features
Device Management
HID Reader Manager, OSDP configuration
HID reader configuration cards
Intelligent Power Mode
Yes
Velocity Attack Detection
Yes
Metal Environment Optimization
Yes – surface detection feature automatically calibrates read range
No
FIPS-201 Outputs
Wiegand and OSDP: CHUID & UUID outputs per reader configuration. CAK, SM Auth, High Assurance Authentication and PKI supported when connected to a pivCLASS Authentication Module (PAM) or controller using HID pivCLASS Embedded Authentication.