The ID CPR70 is a 5 cm x 5 cm small RFID reader that supportscontactless smart cards and transponders according to ISO / IEC 14443 A / B, ISO 15693 and ISO 18000-3M3.
The ID CPR70 reader module was developed for integration interminals, printers, handheld devices, etc.. In operation youcan either used the integrated antenna or connect 50 Ohmantennas. This allows the flexible use of the module in individual applications.
The reader module also achieves variability by different interfaces as well as 3 digital outputs to connect external LEDsor similar.
High-end functionalities
For communication with transponders the reader module canuse extensive high-level functionalities (SoftCrypto). Thearchitecture of the ID CPR70 is based on the wellknown ID CPRfamily from FEIG. This makes the device compatible with allother CPR products in terms of functionality and interfaceprotocol.
In addition to the ISOStart software for demonstrating andconfiguring the reading functions and the firmware updatetool, numerous SDKs and drivers are available to support easyintegration into the customer application.
Specification :
Technical data
Dimensions (w x h x d)
50 mm x 50 mm x 12 .6 mm
Weight
approx. 12 g
MTBF
500,000 h
Power supply
5 V DC ±10 % Ripple: 0…250 kHz < 10 mVss; up from 250 kHz < 0.1 mVss
Power consumption
< 350 mA
Operating frequency
13.56 MHz
Transmitting power
450 mW
Interfaces
USB Full-Speed (12 MBit/s) RS232-TTL (4,800 – 230,400 Baud)
I/Os
3 digital outputs; current per output: max. 12 mA 2 LEDs (green, red); LED-OUT (red LED): max. 10 mA