The ID CPR60 is a 4 x 4 cm small RFID reader that supportscontactless smart cards and transponders according to ISO/IEC 14443 A/B and ISO 15693. It also offers interfaces for upto 4 smart card connectors according to ISO 7816 and is therefore suitable for ticket applications in public transport (VDV-KA).
The ID CPR60 reader module was developed for integration interminals, printers, handheld devices, etc. Own 50 Ohm antennas can be connected variably and allow the module to be usedflexibly in individual applications.
On request, the module can be expanded to include otherstandards such as ISO 18000-3M3 or NFC peer-to-peer (P2P;Passive Initiator Mode) in accordance with ISO/ IEC 18092.
Accustomed handling and high functionality
For host communication a USB interface, a serial interface(RS232-LVTTL) and an SPI interface are available. The ID CPR60offers a standby mode to reduce power consumption to aminimum. The “wake-up-by-card” and “wake-up contact”options are available to wake up the device.
The architecture of the ID CPR60 is based on the wellknownID CPR family from FEIG. This makes the device compatiblewith all other CPR products in terms of functionality andinterface protocol and e. g. just as powerful as the largermodule ID CPR74.
In addition to the CPRStart software for demonstrating andconfiguring the reading functions and the firmware updatetool, numerous SDKs and drivers are available to support easyintegration into the customer application.
For developers a development board for programming applications is available, too.
Specification :
Technical data
Dimensions (w x h x d)
41 mm x 41 mm x 6.5 mm
Weight
approx. 10 g
Temperature range
Operation
−25 °C up to +70 °C
Storage
−40 °C up to +85 °C
Relative humidity
max. 95 % (not condensing)
Power supply
for digital circuit: 3.3 V DC + 5% (max. power consumption: 100 mA) for analog circuit: 5 V DC + 5% Ripple: 0…250 kHz <10 mVpp; up from 250 kHz <0.1 mVpp Max. power consumption peak (excl. SAM): 300 mA Typ. power consumption with RFID (excl. SAM): 200 mA
Power consumption
< 400 mA (excl. SAM’s); < 25 mA Standby mode; < 50 mA Standby mode with Wake-Up-by-Card
Interfaces
USB Full-Speed (12 MBit/s), Self-Powered Device; SPI (up to 16 MBit/s), Slave Device; RS232-LVTTL (4,800–921,600 Baud)
Drivers
USB Driver, PC/SC Driver (WHQL) for Windows 7, 8 and 10 (32/64 Bit) as well as Windows Server 2012 and 2016