HID Global’s pivCLASS R40 wall switch contactless reader is suitable for use in security areas meeting the FIPS-201 criteria for “Controlled” access. When used in conjunction with HID Global’s pivCLASS Authentication Module (PAM), the pivCLASS R40 reader provides strong authentication ensuring that the card being presented is genuine; the data on the card has not been changed or manipulated; and the card is not a copy or clone of another card. The reader supports and reads any PIV-based card with an ISO14443 contactless interface and containing a Card Authentication Key (CAK) certificate.
Key Features
●Popular wall switch format with LED access grant/deny indicator
●Configurable to operate in either Wiegand or PAM mode
●Supports reading legacy cards such as iCLASS, iCLASS SE and standard Prox
PKI-Based FIPS-201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC Secure Identity Object (SIO) on iCLASS Seos, iCLASS SE, MIFARE DESFire EV1 and MIFARE Classic standard iCLASS Access Control Application ISO14443A (MIFARE) CSN
125 kHz Credential Compatibility
HID Proximity, EM4102 Proximity, AWID
Device Characteristics
Mounting
Mullion, single or double-gang switch box
Connector Type
Pigtail Cable – 18 inch (0.5 m) Terminal Block – flush mount
Pigtail Cable – 18 inch (0.5 m) Terminal Block - protruding mount
Color
Black Bezel / Silver Trim (Black Trim available as an accessory)
Black Bezel Only
Material Housing
Polycarbonate – UL94 V0 rated
Operating Voltage Range
12 VDC
5 - 16 VDC
Current Draw (max)
250 mA
200 mA
Device Input & Output
Input: Tri-color LED, Buzzer, Hold Output: Tamper Relay
Input: Tri-color LED, Buzzer, Hold Output: Open Collector – TTL
Operating Temperature Range
-35° C to +66° C (-31° F to +150° F) 0% to 95% non-condensing
Storage Temperature Range
-40° C to +85° C (-40° F to +185° F)
-55° C to +85° C (-67° F to +185° F)
Environmental Rating
UL294 Outdoor and Indoor rated
Ingress Protection
IP65
IP55; IP65 if installed with optional gasket (IP65GSKT)
Controller Communication
Half duplex supports OSDP protocol and HID pivCLASS protocol. Wiegand, Clock & Data integrated into base hardware.
Full duplex supports HID pivCLASS protocol, Half duplex supports OSDP and HID pivCLASS protocol . Wiegand, Clock & Data integrated into base hardware.
Cable Distance 1
RS485 for communication (500 ft [152m], 22AWG), (300 ft [91m], 24AWG); two wires for power (500 ft [152m], 22AWG)
Device Features
Device Management
HID Reader Manager, OSDP configuration
HID reader configuration cards
Intelligent Power Mode
Yes
Velocity Attack Detection
Yes
Metal Environment Optimization
Yes – surface detection feature automatically calibrates read range
No
FIPS-201 Outputs
Wiegand and OSDP: CHUID & UUID outputs per reader configuration. CAK, SM Auth, High Assurance Authentication and PKI supported when connected to a pivCLASS Authentication Module (PAM) or controller using HID pivCLASS Embedded Authentication.